|
The need for seismic capacity of milling equipment to assess in isolation Raymond mill equipment design,Check the electrical circuit meets the requirements of the drawings. Check the coupling bolts, screws are tight peg, especially within the host each coupling bolts, tighten the clamp screw applications. Dawn mechanical ultrafine grinding technology independence from the market first, ultrafine grinding is a high-tech developed rapidly in the past 20 years, and can add a raw material into a micron or nanometer powder, in all walks of life have been widely applications. seismic capacity and placed at ground motion parameters Raymond mill design. The lower mill has an internal motor driven roller and disc rotation will require material crushing or grinding mill, through inlet wind blowing the finished material, there is a separator inside the mill, the meal can then be separated by passing through the mill The wind from the outlet out of the collection. Air volume control: the fan into the wind pipe located on the control valves are generally open to the maximum position, according to the fineness and production requirements appropriate adjustments. A small amount of wind, fineness. It should be noted too easy precipitation wind beneath a small host of duct material, make the appropriate adjustments. Located in the fan control valve on the outlet pipe for dust transferred during normal operation of the inlet dust spray can.
|
|