How to get latest Hexagon Caesar II v14 2024 Price - Pipe Stress Analysis

Caesar2

CAESARII® isstress analysis software used for the mechanical design and analysis of pipingsystems. You can create a model of the piping system and define the loadingconditions imposed on the system. With this input, the software producesresults in the form of displacements, loads, and stresses throughout thesystem. Additionally, the software compares these results to limits specifiedby recognized codes and standards.

Thelatest CAESAR II release delivers new and extended capabilities in response tocurrent market requirements and feedback from the CAESAR II user community.

CAESARII Version 14 – 2024

Addedsupport for ASME B31J – 2017 for stress intensification factors (i-Factors) andflexibility factors (k-Factors) in the 2020 editions of the ASME B31.1, B31.3,and B31.9 piping codes. Supports the optional use of B31J with other metallicpiping codes. See SIFs & Tees and Bend. (RI-TX-36876)

IntegratedASME B31J SIFs and flexibilities into the software. See Bend, Reducer, SIFs& Tees, Bend SIF Scratchpad, Intersection SIF Scratchpad, MiscellaneousData, and B31J Methods. (RI-TX-36876)

IntegratedASME B31J SIFs and flexibilities into Static Analysis. (RI-TX-36876)

IntegratedASME B31J SIFs and flexibilities into Miscellaneous reports, including displayof default values used in calculations when input values are outside of allowedB3J ranges. (RI-TX-36876, CR-TX-40240)

Addedoptions for applying B31J SIFs and flexibilities to the Configuration Editor.(CR-TX-37436)

Removedthe outdated calculation modules SIFs @ Intersections and SIFs @ Bends, whichare replaced by the new B31J integration. (CR-TX-39928)

Addeda B31J Methods technical discussion to the help. (RI-TX-36876)

Codesand Standards

Addedsupport for multiple piping code editions. The support includes updating thepiping code user interface throughout the software to support both the CAESARII version 12 code editions and the new editions added to version 13. Adetailed dialog explains the code edition changes that occur if you open andsave a job file created in an earlier software version. See Open an existingpiping input file and Legacy Piping Code Editions and Jobs Created withPrevious CAESAR II Versions. (CR-TX-16559, CR-TX-20368, RI-TX-39415)

Addedsupport for the following piping code editions:

B31.1(power piping) – 2020 edition. (RI-TX-36526)

B31.3and B31.3 Chapter IX (process piping) – 2020 edition. (RI-TX-37237)

B31.5(refrigeration piping & heat transfer) – 2019 edition. (RI-TX-37238)

B31.8and B31.8 Chapter VIII (gas transmission & distribution) – 2020 edition.(RI-TX-38626)

B31.9(building services) – 2017 and 2020 editions. (RI-TX-37239)

EN-13480-3:2017/A4:2021.(RI-TX-37250)

Addedsupport for the following wind and seismic code editions:

NationalBuilding Code of Canada – 2015 edition – Wind and Seismic. (RI-TX-40167)

InternationalBuilding Code (IBC) – 2018 edition – Wind and Seismic. (RI-TX-40167)

Updatedequipment code API 610 to the 12th edition, January 2021. (CR-TX-39970)

Materialand Content

Addedspring sizes 000, 00, 23 and 24 for the VSS, VSM, and VSL springs to the Unisonhanger tables. Also added the new extended working range VST and VSQ springs.(CR-TX-30758)

Addedsupport for the UK 1996 structural database, including British square hollowsections (SHS) and updated T shapes (TUB and TUC). (RI-TX-39056)

Updatedthe materials required for the ASME B31.3 2020 edition. (DI-TX-39324)

Updatedthe materials required for the ASME B31.9 2017 edition. (CR-TX-36435)

Updatedthe materials required for ASME Section VIII 2021 edition. (CR-TX-39694)

Implementedthe complete flange database for EN 1092 (RI-TX-37250)

Updatedthe Pipe Support Systems GmbH International (PSSI) spring hangers catalog tothe 2010 edition. (CR-TX-40881)

MainWindow

Removeddialogs for monthly checks of software updates and the outdated versionwarning. You can see the latest version on the news channel of the Main Windowand Check for Updates on the Help Tab. (CR-TX-5510, CR-TX-37571)

Updatedthe link to Smart Support for About on the File Tab and Smart Support on theHelp Tab. (CR-TX-37121)

Addednotes to clarify support for multiple code editions when selecting materialsfrom the Material Database Editor. The notes display as a dialog when openingthe Material Selection Dialog of the Material Database Editor, directly on theMaterial Selection Dialog, and in the help. (CR-TX-39918)

PipingInput

Addedthe Spring Can with Friction Builder, which simplifies the modeling of springcans. The builder includes the option for a simple design or a comprehensive design,providing control over the level of design details. (CR-TX-16698)

Addedan asterisk to materials that are not supported by the selected code.(CR-TX-39934)

Revisedthe SIFs & Tees interface to support EN-13480-3:2017/A4:2021. See In-PlaneSIF (ii) / Bending and Properties Used for SIF Calculations with Other MetallicPiping Codes. (CR-TX-40461)

StaticAnalysis

Addeda Fluid Density Multiplier (FDM) to the Static Load Case Editor. Thismultiplier allows you to adjust the fluid density for each load case. Helpincludes a technical discussion about FDM. (RI-TX-35041)

Addeda B31.3 minimum design metal temperature (MDMT) stress type to the Static LoadCase Editor. Added a B31.3 reduced MDMT value based on the stress ratio. Alsoadded an MDMT Report to the Static Output Processor. Added a technicaldiscussion about MDMT. (RI-TX-33548)

Equipment

Updatedthe API 610 (Centrifugal Pumps) component of Equipment Analysis to allow theAllowable Load Multiplier to be greater than 2.0 with restrictions.(CR-TX-37404)

Updatedthe EN13445-3 Annex G field in EN-1591 Flanges as part of the EN 1092 flangedatabase implementation. (CR-TX-36322)

Outputand Reports

Updatedstatic Standard Reports and Miscellaneous Reports. (CR-TX-39975)

ExternalInterfaces

Improvedthe PCF processing algorithm for Smart 3D PCF and Advanced PCF Import to adjustunit conversion tolerances when converting nominal pipe diameters to actualdiameters. (CR-TX-38522)

OperatingSystem

Addedsupport for 64 bit Windows 11 21H2 or later Professional and Enterprise to meetHexagon Asset Lifecycle Intelligence enterprise platform requirements.(RI-TX-39888)

Documentation/Help

Removedan old dialog box reference in Saving an Image for Later Presentation.(CR-TX-37196)

Removeda duplicate instruction in Tutorial A in the CAESAR II Application Guide.(CR-TX-37301)

Clarifiedthe definition of Load Cycles, cyclic stress range reduction factors, andassociated properties. (CR-TX-40569)

Addedinformation to better describe all functions of Include Piping Input Files andInclude Structural Input Files. (CR-TX-38843)

Updatedand expanded CAESAR II Neutral File definitions. (CR-TX-38332, CR-TX-37838)

ProductAESAR II v14 - 2024
Version: v14 - 2024
Supported Architectures: x64
Language: English
Supported Operating Systems: Windows 7even or newer

I can  generate (unofficial) license of any Hexagon Software, including latest  Caesar II v14       If you need this  software for your projects or training and official price is beyond your  budget, then you may contact me on my below email ID:       software.ck23@gmail.com       Note: My services  are paid but very economical and budget friendly, I provide complete solution  at one spot including software download, license activation, online  installation support and after sale support and updates